The resin is fed according to the principle similar to that of an oil pump. The vat can be positioned at an angle to conveniently drain the resin back into the bottle.Ĭartridges are installed without any problems. The model fell apart, stuck tightly to the film. The cause of the tear is incorrect settings for printing a large product with third-party resins. The rest of the film remained on the model. In the photo above is an example of the film tearing off. The manufacturer guarantees the increased strength of the standard film, compared with PDMS analogues. If the film tears or you remove a model carelessly, the resin will not "flood" the printer. The standard film of the vat is multi-layer, reinforced. You can install third-party films of suitable size. The vat on the sides has a groove for mounting the resin level sensor. Located on the sides: a camera for observing the process, resin feed tube with a liquid level sensor, and a level sensor mount. The Z-axis is equipped with a ball screw and linear rail. In this window, you can connect the printer to your Wi-Fi router and create a Uniz account. So, if we connect to the printer via IP, the router window will open: The printer is equipped with its own Wi-Fi router. You can manage the printer via either a PC or a smartphone.įor the printer to work, you must connect it to Wi-Fi or a wired connection. The printer has a touch button on the front panel and an on/off button on the back. Compatible File Formats: STL, OBJ, AMF, 3MF, UNIZ.Compatible Systems: iOS, Android, Windows 7 and up (64-bit only), Mac OS X 10.7 and up (64-bit only), 16GB RAM, OpenGL 2.1, Discrete Graphics.
Hey everyone! The device we are talking about today is the Uniz Slash+ 3D printer.
0 kommentar(er)
